ADMIX GROUT I is based on specially processed cement, fillers and additives. It
is ready to use component and only addition of water required at site. 25 kg
ADMIX GROUT I requires 4.75 Ltr of water for flowing grout. Water powder (w/p)
ratio is 0.19. ADMIX GROUT I is suitable for thickness between 10mm to 50mm.
However in excess of 50mm thickness, cleaned and washed 10mm aggregate can be
incorporated to the mix at the rate of 50% to 100% of the quantity of grout
used. Controlled expansion takes place in the unset material to ensure that the
grout, when cured, will continue to occupy its original volume. For thicker
section it is necessary to incorporate well graded and washed aggregate in to
the grout to minimise heat build up.
AREA OF USAGE :-
Factories – warehouses - Parking area – Workshops – Garages – Subways - Loading
bays etc.
| AGE IN DAYS | COMPRESSIVE STRENGTH IN kg/cm² | |
| Pourable W/P 0.17 | Flowable W/P 0.19 | |
| 1 | 200 | 150 |
| 3 | 300 | 250 |
| 7 | 375 | 325 |
| 28 | 500 | 475 |
Available in 25 kg HDPE bags.
Bolt pockets and base plate grouting of all rotary and static equipments. Also grouting of stanchion bases of all types of machinery in industries or industrial projects.
Minimum 6 months from the date of manufacturing if stored in original container under shade, unopened.