product > DOMESTIC FLOORING > admix tiles joint

DESCRIPTION

PRODUCT :- Single part, hard wearing, water resistant tile joint filler

APPLICATION GUIDE LINES :-
1. SURFACE PREPARATION:
The surface should be sound and clean. All loose particles should be physically removed from the surface and the area of application should be kept slightly wet. Tile filler should be applied only after 24 hours of tile fixing.

2. MIXING:
ADMIX TILE JOINT should be mixed with water at 3:1 ratio (3 kg powder & 1 Ltr water). However addition of water/powder should be determined at site based on the consistency required.

3. FINISHING:
Apply ADMIX TILE JOINT diagonally into the joint and ensure the joint is filled uniformly. Remove excess grout with a wet sponge before drying. Once the joint filler is dried just before hardening, polish the tiles with clean dry cloth. Sprinkle water after 24 hours and continue it for couple of times to ensure bond strength.

QUALITY ASSURANCES :- ADMIX TILE JOINT is manufactured under stringent quality control compatible with different climates of India.

BENEFITS

• Better consistency
• excellent adhesion
• water proofing characteristics
• can be used for exterior and interior applications upto 5mm width.

PACKING

Available in 25 kg bags and 1 kg containers.

USES

ADMIX TILE JOINT is a specially designed and high quality product for filling the joints of wall and floor ceramic tiles and mosaics upto 5mm width.

COVERAGE

1 kg ADMIX TILE JOINT covers approximately 150 running feet at 2mm thickness.

SHELF LIFE

6 months from the date of manufacturing.