ADMIX FLO-A1 is dark brown liquid based on modified sulphonated
naphthalene
polymer. The powerful dispersing capacity of this product facilitates reduction
in water, while producing dense, cohesive and high strength durable concrete.
The parameters of this product are designed to perform and justify its usage.
WORKABILITY :-
ADMIX FLO-A1 increases workability & produces cohesive and dense concrete which
facilitates easy placement.
STRENGTH :-
Reduction in water addition, production of cohesive and dense concrete leads to
increased early and ultimate strength which facilitates early removal of form
work.
PRODUCT PROPERTIES :-
Colour : Dark brown.
Specific gravity : 1.200 to 1.210
Chloride content : NIL as per BS 5075
Air Entrainment : Less than 1%
Compatible with all types of OPC.
Appearance : Liquid form
pH : 7.5 ± 0.5
ADDITIONAL INFORMATION :- ADMIX FLO-A1 is high solid liquid product. Hence proper
stirring is required to get optimum results. It is therefore requested to stir /
shake well before every use.
QUALITY ASSURANCES :- ADMIX FLO-A1 is manufactured under stringent quality control
and compatible with different climates of India.
Available in 100 kg & 200 kg plastic drums.
ADMIX FLO-A1 is recommended for obtaining high workability in the concrete with out addition of extra water. This helps reduction of water and achieves very early and 28 days ultimate strength. Also ideal for higher grade concrete, pre-stressed, pre-cast & pavement concrete, exposed slab and mass concrete making.
200 ml to 600 ml per 50 kg of cement. However the optimum dosage to be determined at site.
12 months from the date of manufacturing if stored in original container under shade.